Fluid Control Module (Fcm) - Graco VRM Instructions Manual

Fluid Control Module (FCM)

Install Upgrade and Key Tokens
Note: FCM connection to system is temporarily disabled
during the installation of upgrade or key tokens.
1. Ensure system is inactive.
2. Remove access cover (D).
F . 14
IG
3. Insert and press token (T) firmly into slot.
NOTE: There is no preferred orientation of token.
L
S
F . 15
IG
313873C
D
ti12334a1
ti12320a1
M
T
4. Press and hold the push button (M) for three sec-
onds and then release. The red LED (L) flashes until
the software is uploaded. See F
5. Remove token (T) when software has successfully
uploaded.
6. Replace access cover (D).
Maintenance
. 15.
IG
39