Fluid Module Configuration Code - Graco Wolverine A261 Series Instructions-Parts List Manual

Models and Approvals

Fluid Module Configuration Code

Model Number
Date Code
F . 3 Example of the Fluid Module Identification Plate
IG
Sample Configuration Number: CI-50-XA-0
Chemical Injection
NOTE: Effective Date Code "X 2516" (see F
pump assembly configuration. See manual 334513, rev C.
NOTE: See Drive Module Configuration Code, page 9, for drive module side 1 and side 2 compatibility with the
fluid module.
NOTE: See Reconnect Pump, page 34, for fluid section installation instructions.
NOTE: Fluid module approvals information is found on page 5.
10
A30600
# #### A
Graco Inc., P.O. Box 1441
Mpls, MN 55440 USA
CI 50
Plunger Size Plunger Coating
Plunger
Size Plunger Coating
19 3/16" X Chromex
25 1/4" C Ceramic
38 3/8"
50 1/2"
63 5/8"
75 3/4"
. 1), if your configuration does not match this format, you have an older
IG
CI-50-XA-0 ########
1250 ( 8.6 )
X
Seal Material
Seal Material
A FKM
B FKMETP
C HNBR
D FFKM
E TFE/P
Configuration Number
A 0
Qualifier
Qualifie
r
0 None
334513N