Table of Contents
Advertisement
Single-phase application (2 wires)
Split phase application L1/L2 (3 wires)
Split phase application L1/L3 (3 wires)
2.5.5
Rotary actuator outputs
The actuator outputs are used when a 4-wired rotary actuator is installed in your application. The integrated electronic
governor in the SGC controller is used together with the actuator to create an electronic governing application for
mechanical fuel engines. In diesel engines, the shaft output in the actuator is mechanically connected to a stop lever or the
throttle level in a fuel injection pump, for example. For petrol and natural gas engines, the shaft output is connected the
throttle or charge control valve.
User manual 4189341355A EN
Page 17 of 92
Advertisement
Table of Contents
