Automatic Storage At Intervals - wtw inoLab pH/ION 735 Operating Manual

Operation
Configuring the auto-
matic storage function
Settings
60

4.6.2 Automatic storage at intervals

The storage interval (Interval) determines the chronological interval be-
tween automatic storage processes. Each storage process transmits
the current dataset to the interface at the same time.
1 Press the <STO> key for a long time.
The menu for automatic storage appears.
<STO_>
Store with ID no.
Interval
Duration
Continue
00d03h00min
You can configure the automatic storage function with the following set-
tings:
Menu item
Store with ID no.
Interval
Duration
1
30 s
180 min
00d15h
34 min
Possible Description
setting
1 ... 999 ID number for the dataset
series.
5 s, 10 s, 30 s, Storage interval.
1 min, 5 min,
10 min, The lower limit of the stor-
15 min, age interval can be restrict-
30 min, 60 min ed by the number of free
storage locations.
The upper limit is restricted
by the storage duration.
1 min ... x min Storage duration.
Specifies after which time
the automatic storage
should be terminated.
The lower limit of the stor-
age duration is restricted
by the storage interval.
The upper limit is restricted
by the number of free stor-
age locations.
inoLab pH/ION 735