Technical Data - ESAB ROBUSTFEED EDGE Instruction Manual

3 TECHNICAL DATA
3

TECHNICAL DATA

Power Supply voltage
Power requirement
Rated supply current I
Torch connection
Wire feed speed
Max. diameter wire bobbin
Weight:
RobustFeed Edge BX
RobustFeed Edge CX
Maximum weight wire spool
Dimensions (l×w×h)
Operating temperature
Transport and storage temperature
Shielding gas
Shielding gas
Gas flow range for RobustFeed Edge BX
Gas pressure for RobustFeed Edge CX
Coolant
Maximum coolant pressure
Permissible load
60% duty cycle
100% duty cycle
Enclosure class
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld at a certain
load without overloading.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration by solid
objects or water.
Equipment marked IP54 is designed for indoor and outdoor applications. It is protected in all directions
against dust accumulation and water exposure either through splashing or dripping.
0463 786 001
ROBUSTFEED EDGE
1
60 VDC
234 W
3.9 A
EURO, Tweco #4
32–984 in./min (0.8–25.0 m/min)
12 in. (300 mm)
37 lb. (16.8 kg)
38.6 lb. (17.5 kg)
44 lb. (20 kg)
23.4 × 9.8 × 16.9 in. (595 × 250 × 430 mm)
-4° to +131°F (-20° to +55°C)
-40° to +176°F (-40° to +80°C)
All types intended for GMAW welding
11–74 CFH (5–35 l/min)
43–73 PSI (3–5 bar)
ESAB's ready mixed coolant
73 PSI (5 bar)
500 A
400 A
IP54
- 13 - © ESAB AB 2023