Table of Contents
Advertisement
5 OPERATION
5.4
Cooling liquid connection
ELP (ESAB Logic Pump)
The cooling unit is equipped with a detection system called ELP (ESAB Logic Pump) which checks
that the coolant hoses are connected. When a liquid-cooled torch is connected, cooling starts.
When connecting a liquid-cooled welding torch, the main power supply switch of the power source
must be in the OFF position.
5.5
Heater/Feeder on-off switch
Indicator
Description
Feeder OFF
Heat ON and feeder OFF
The bobbin area is heated to keep
the welding wire dry. Heating the
bobbin area is highly
advantageous in environments
with high levels of humidity or
where the temperature fluctuates
throughout the day.
5.6
Lighting inside the wire feed unit
Lights are fitted inside the cabinet of the wire feed unit.
1. The light located by the feeder mechanism will turn on and off when the door is
opened and closed respectively.
2. The light located by the wire bobbin turns on when the door is opened and live
welding is in progress.
It will turn off automatically after the welding has been stopped or the side door has
been closed.
5.7
USB export
The USB port enables the user to export the error log report and software version.
5.8
Bobbin brake
The bobbin brake force should be increased just enough to prevent wire feed overrun. The actual
brake force required depends on the wire feed speed and the size and weight of the bobbin spool.
0463 786 001
Indicator
Description
Feeder ON
Heat ON and feeder ON
- 19 -
© ESAB AB 2023
Advertisement
Table of Contents
