Unit Of Measurement; Date And Time; About; Rotating The Control Panel - ESAB ROBUSTFEED EDGE Instruction Manual

6 CONTROL PANEL
6.6.6

Unit of measurement

This function enables the user to switch the units between metric and imperial.
6.6.7

Date and time

This function enables the user to view/set the date and time.
6.6.8

About

This function enables the user to view the software versions of the connected subsystem.
6.7

Rotating the control panel

To use the wire feeder in the horizontal position, the external control panel may be rotated 90°.
1) Remove the two screws for the control panel and remove the panel.
2) Disconnect the panel harness.
0463 786 001 - 47 - © ESAB AB 2023