Copy A Job - ESAB ROBUSTFEED EDGE Instruction Manual

6 CONTROL PANEL
6.4.2

Copy a JOB

1) Navigate to the Menu
2) To copy or duplicate a job, navigate to the desired job to activate it on the screen.
3) Select the desired job number and press the save button on the top left to copy or duplicate.
NOTE!
While saving a job, if the existing job number with pre-saved data is selected. It will
overwrite the new weld parameters.
0463 786 001
button and select JOBs
- 40 - © ESAB AB 2023