Add A New Instrument Connection - Keysight SR101EDUA User Manual

You can configure the server IP address, port range, authentication credentials, and other relevant
server settings here.
Click on Reset All Settings to reset all settings to their default values and restore the
application/device to its original state. This will erase all changes or customizations that you have
made to the application/device.

Add a New Instrument Connection

DLS supports the following protocols for instrument connection, which is the manner of which DLS
connects to an instrument:
•
•
•
Follow the steps below to add a new
instrument connection.
Keysight SR101EDUA Digital Learning Suite User's Guide
Direct
Remote Desktop Protocol (RDP)
Virtual Network Computing (VNC)
Direct Access instrument connection or a new RDP or VNC
55