Step 3. Loosen the locking knobs on the acceleration table
paper guide blocks and slide the acceleration table
paper guides outward. Grasp the paper guide
block to move the guides.
4
Step 5. Place one of your envelopes between the hopper
paper guides above the feed belts.
Step 6. While holding the envelope with one hand, rotate the paper guide adjusting knob to move the
paper guides in until they are alongside the edges of your envelope.
6
Locking knobs
Do not pinch the envelope with the Hopper paper guides.
3
Step 4. Loosen the back wedge assembly locking knob
and slide the back wedge back away from the feed
belts for easy access to the envelope hopper area.
5
7
12