Table of Contents
Advertisement
3.3.3. Setting the Back Wedge for large envelopes
In addition to setting the paper guides properly for large envelopes, the back wedge will need to be adjusted.
For larger (longer) envelopes, you will need to move the back wedge further away from the bridge.
Back wedge locking knob
Larger (longer) envelopes have a tendency to 'sag' downward in the middle, which can cause double feeding or
inconsistent gaps between envelopes. This 'sagging' can be remedied by lowering the angle of the back wedge
and moving it a bit more underneath the stack of envelopes as shown below.
The back wedge ramp can be used to lift the middle of the envelopes off
the belts
As with the separators, some experimentation would be helpful to obtain the best results.
18
Advertisement
Table of Contents
