Table of Contents
Advertisement
3.2 Setting the Envelope Separator(s) (continued)
Step 1. If using a single separator (recommended), ensure
that the buckle separator is positioned in the gap
between the two center feed belts.
2
Step 3. Place the lead edge of your envelope under the
buckle separator's yellow tip as shown below.
4
1
Step 2. Rotate the separator height adjustment knob
clockwise several turns to raise the separator
tip up above the level of the feed belts.
Separator height adjustment knob
Separator tip (yellow)
3
Step 4. Slowly turn the separator height adjustment
knob counter-clockwise to lower the separator tip onto
the envelope.
14
Advertisement
Table of Contents
