Table Of Contents - Intec ColorSplash CS4000 Installation And Setup Manual

ContEntS
1. GEttInG StartEd
1.1. ColorSplash EPP Envelope Feeder Components
1.2. Control Panel Components and Features
2. InStallatIon GUIdE
2.1. Preparing the INTEC CS4000 / CS5000 Printer for use with your
Intec EPP Envelope Feeder
2.1.1. Removing the MPT Tray/Door
2.1.2. Removing the Outer Separation Pad
2.1.3. Installing Non-Reflective Aid for Envelope Feeders Optical Sensors
2.2. Assembly of the Intec ColorSplash Envelope Feeder
2.2.1. Assembly of Top Plate
2.2.2. Assembly of the Feeder Bridge
2.2.3. Fitting the Paper Hold Down Strap
2.2.4. Positioning the Envelope Buckle Separator
3. oPEratInG GUIdE
3. Setting up the Feeder for envelopes
3.1. Setting the Hopper Paper Guides
3.2. Setting the Envelope (Buckle) Separator(s)
3.3. Setting up the Back Wedge
3.3.1. Purpose of the Back Wedge
3.3.2. Setting the Back Wedge for small / medium envelopes
3.3.3. Setting the Back Wedge for large envelopes
3.4. Setting the Acceleration Table Paper Guides
4. ChECkInG yoUr FEEdEr SEtUP
5. daIly oPEratIon (running envelopes with your printer)
5.1. Mounting/Connecting your Envelope Feeder
5.2. Envelope Feeder's latch mechanism
5.3. Setting the Feeder's speed control
5.4. Resume feeding switch /paper out sensor control
5.5. Paper jam or feeder out condition
5.6. Setting the Intec ColorSplash Envelope Feeder's speed control
5.7. Removing the Feeder from the printer
6. troUBlEShootInG
6.1. Note on new ColorSplash printers
6.2. Common issues
2
3
4
5
5
5
6
6
7
8
8
9
10
11
11
11
13
16
16
16
18
19
21
22
22
23
24
24
25
26
26
27
27
27