Pictographs; Stickers On The Product; Fig. 1: Position Of The Stickers On The Product - Pfeiffer Vacuum HIPACE 300 Operating Instructions Manual

Turbopump
Table of Contents

Advertisement

Available languages

Available languages

About this manual
Sequence of multi-part action steps
The numerical list indicates an action with multiple necessary steps.
1. Step 1
2. Step 2
3. ...
1.3.2 Pictographs
Pictographs used in the document indicate useful information.
1.3.3 Stickers on the product
This section describes all the stickers on the product along with their meanings.
D-35614 Asslar
Mod.
P/N
S/N
Oil
n, f
Mass
Fig. 1:
1 Operating instructions note
2 Warranty seal
64/116
Note
Tip
HiPace 300
PM P05 _ _ _ _
- - - - - - - -
Type 12
IP _ _
PM
-T
_ _ _ _ _ _
TÜV Rheinland
60000 1/min, 1000 Hz
C
Made in Germany
6.2 kg
2022/_ _
warranty seal
1
4
3
Position of the stickers on the product
Rating plate
The rating plate of the turbopump is located on the lower part
of the vacuum pump.
Rating plate of the electronic drive unit
The rating plate of the electronic drive unit is located on its out-
US
side next to the LEDs
Operating instructions note
This sticker indicates that this operating instructions must be
read before performing any tasks.
Protection class
This sticker describes protection class 1 for the product. The
positioning indicates the position for the ground connection.
Warranty seal
The product is sealed ex-factory. Damaging or removing a war-
ranty seal results in loss of the warranty.
2
3
Information regarding ground connection
4
Rating plate of the turbopump

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hipace 800Hipace 350Hipace 400Hipace 450Hipace 700

Table of Contents