Failure to do so can result in severe Air Cooled Units personal injury from electrical shock! The model 702 requires a minimum of 6” (152 mm) of clearance around both sides of the freezer. Install the deflector on the right side of the unit, and place the back of the unit against the wall to prevent recirculation of warm air.
It should also be noted that Taylor does not warrant the In the event that you should require technical refrigerant used in its equipment. For example, if the...
We at Taylor Company are concerned about the safety of the operator when he or she comes in contact with the freezer and its parts. Taylor has gone to extreme efforts to design and manufacture built-in safety DO NOT allow untrained personnel to features to protect both you and the service technician.
Need help?
Do you have a question about the 702 and is the answer not in the manual?
Questions and answers