Taylor 150 Service Manual
  1. Manuals
  2. Brands
  3. Taylor Manuals
  4. Freezer
  5. Taylormate 150
  6. Service manual

Taylor 150 Service Manual

Soft serve freezers
Hide thumbs Also See for 150:
Table of Contents

Advertisement

Quick Links

Model 150, 152, 162 & 168
Service Manual
028749−S
Soft Serve Freezers
SERVICE
MANUAL
5/99 (Original Publication)
(Updated 2/11/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 150 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Taylor 150

Summary of Contents for Taylor 150

  • Page 1 SERVICE MANUAL Model 150, 152, 162 & 168 Soft Serve Freezers Service Manual 028749−S 5/99 (Original Publication) (Updated 2/11/16...

  • Page 3: Table Of Contents

    ..........Model 150 Operator Parts Identification .
  • Page 4 ........... . Note: Continuing research results in steady improvements; therefore, information in this manual is subject to change without notice. CAUTION: Information in this manual is intended to be used by Taylor Authorized Service Technicians only. Note: Only instructions originating from the factory or its authorized translation representative(s) are considered to be the original set of instructions.

  • Page 5: Section 1: Introduction

    Section 1: Introduction Safety Specifications Running Specifications General Installation Instructions Environmental Notices Introduction Models 150, 152, 162, 168...

  • Page 6: Safety

    60245 IEC 57) installed with the proper cord equipment. The many built−in safety features that are anchorage to relieve conductors from strain, part of all Taylor equipment are aimed at protecting including twisting, at the terminals and operators and trained service technicians alike.
  • Page 7 Using a water jet or hose on or around this equipment may result in electrocution to the user or damage to the equipment. 110801 Introduction Models 150, 152, 162, 168...

  • Page 8: Model 150 Specifications

    Model 150 Specifications Freezing Cylinder This unit may be manufactured in other electrical characteristics. Refer to the local Taylor Distributor for availability. (For exact electrical information, always One, 1.5 quart (1.4 liter). refer to the data label of the unit.)

  • Page 9: Model 152 Specifications

    Model 152 Specifications Freezing Cylinder This unit may be manufactured in other electrical characteristics. Refer to the local Taylor Distributor for availability. (For exact electrical information, always One, 1.5 quart (1.4 liter). refer to the data label of the unit.)

  • Page 10: Model 162 Specifications

    Circuit Ampacity 208-230/60/1 Air Mix Hopper This unit may be manufactured in other electrical characteristics. Refer to the local Taylor Distributor for Two, 8 quart (7.6 liter). availability. (For exact electrical information, always refer to the data label of the unit.)

  • Page 11: Model 168 Specifications

    Circuit Ampacity 208-230/60/1 Air Mix Hopper This unit may be manufactured in other electrical characteristics. Refer to the local Taylor Distributor for Two, 8 quart (7.6 liter). availability. (For exact electrical information, always refer to the data label of the unit.)

  • Page 12: Running Specifications

    Running Specifications Low Side The following are the pressure and temperature settings recommended by Taylor, and apply to all Low side pressure is determined by the expansion models covered in this manual. valve setting. Adjust the pressure higher or lower by turning the adjustment knob on the expansion valve.

  • Page 13: General Installation Instructions

    Two or more people are required to safely move this unit. Failure to comply may result in personal injury or Examples: equipment damage. scraper blades Uncrate the machine. Inspect the unit for damage. Report any damage to the Taylor factory immediately. condenser fins Introduction Models 150, 152, 162, 168...
  • Page 14 To correct rotation on a single-phase unit, change the from the power source must have an all-pole leads inside the beater motor by following the diagram disconnecting device with a contact gap of printed on the motor label. Introduction Models 150, 152, 162, 168...
  • Page 15 Water Connections Refrigerant (Water Cooled Units, Only) In consideration of our environment, Taylor proudly uses only earth friendly HFC refrigerants. The HFC refrigerant used in this unit is R404A. This refrigerant An adequate cold water supply must be provided with is generally considered non-toxic and non-flammable, a hand shut−off valve.

  • Page 16: Environmental Notices

    If the crossed out wheeled bin symbol is affixed to this product, it signifies that this product is It should be noted that Taylor does not warrant the compliant with the EU Directive as well as other similar refrigerant used in its equipment. For example, if the legislation in effect after August 13, 2005.

  • Page 17: Section 2: Controls And Systems

    Section 2: Controls and Systems Refrigeration Schematic Separate Hopper Refrigeration (SHR) Temperature Control Viscosity Control TQC Control Controls and Systems Models 150, 152, 162, 168...

  • Page 18: Refrigeration Schematic

    Refrigeration Schematic Figure 5 130521 Controls and Systems Models 150, 152, 162, 168...

  • Page 19: Separate Hopper Refrigeration (Shr)

    At Note: The dryer must be installed vertically, with the this time, the temperature will never be satisfied. This capillary tube at the bottom. Controls and Systems Models 150, 152, 162, 168...

  • Page 20: Temperature Control

    (terminal #2 opens to #1), and L1 power supplied to the compressor Note: When draw switch activates, relay coil deactivates. compressor will start within 15 seconds. Controls and Systems Models 150, 152, 162, 168...
  • Page 21 (warmer) until the refrigeration system cycles off. Draw additional samples after, and adjust if necessary. Replace the temperature control knob with the indicator mark pointing away from the freezer, to allow for a 2_ adjustment warmer or colder. Controls and Systems Models 150, 152, 162, 168...

  • Page 22: Viscosity Control

    Note: The solid state timer in the control circuit will 037260-12 Supply voltage 115 VAC - 60 Hz also activate the main refrigeration system once the 037260-27 Supply voltage 208-240 VAC - 50/60 Hz off-cycle time has elapsed. Controls and Systems Models 150, 152, 162, 168...
  • Page 23 During the freezing process, draw samples and inspect the product appearance. When the desired product viscosity is achieved, note the beater motor Note: The range selection is not the same as the TQC amperage. range selection. Controls and Systems Models 150, 152, 162, 168...
  • Page 24 Note: On old style controls, if the wrong wire is cut Turn the viscosity adjustment potentiometer clockwise when setting the amperage range selection, simply to the coldest setting. solder the wire back together. Controls and Systems Models 150, 152, 162, 168...

  • Page 25: Tqc Control

    The solid state timer also activate the main refrigeration system. The resets to zero each time the compressor contactor freezer draw switch or solid state timer reactivates the refrigeration system when necessary. closes. Controls and Systems Models 150, 152, 162, 168...
  • Page 26 2.5 − 5.0 White and Blue Note: If the wrong wire is cut when setting the 4.0 − 8.0 White amperage range selection, simply solder the wire back 5.7 − 11.4 None together. Controls and Systems Models 150, 152, 162, 168...

  • Page 27: Section 3: Troubleshooting Guide

    Section 3: Troubleshooting Guide General Troubleshooting Control Troubleshooting Watt Control Troubleshooting Troubleshooting Guide Models 150, 152, 162, 168...

  • Page 28: General Troubleshooting

    Install the front bearing on the scored. bearing on the freezer door. freezer door. b. The gear unit or the direct drive is b. Align the gear unit or the direct drive. out of alignment. Troubleshooting Guide Models 150, 152, 162, 168...
  • Page 29 Cycling on overload. b. Low line voltage. b. Check main line voltage. Locate the voltage drop. c. Open starting capacitor. c. Replace the starting capacitor. d. Faulty capacitor relay. d. Replace the relay. Troubleshooting Guide Models 150, 152, 162, 168...
  • Page 30 22. Oil logged evaporator. a. Bent beater. a. Replace the beater. b. Incorrect beater rotation. b. Refer to diagram. c. Faulty expansion valve. c. Replace. d. Starved evaporator. d. Keep sufficient amount of mix in hopper. Troubleshooting Guide Models 150, 152, 162, 168...

  • Page 31: Control Troubleshooting

    The Watt viscosity control will cycle the compressor off power to the control, the TQC relay will always remain when drawing product if the viscosity setting is closed and a freeze-up condition will occur. Troubleshooting Guide Models 150, 152, 162, 168...

  • Page 32: Watt Control Troubleshooting

    0. If the voltage is greater than 10 millivolts, there is excess current leakage through the beater motor or If these critera are not met, the control is defective and the control is defective. must be replaced. Troubleshooting Guide Models 150, 152, 162, 168...

  • Page 33: Section 4: Parts

    Section 4: Parts Parts Warranty Exploded Views Parts List Parts Models 150, 152, 162, 168...

  • Page 34: Warranty Explanation

    Class 000 Parts: Wear Items - no warranty. CAUTION: Warranty is valid only if required service work is provided by an Authorized Taylor Service Technician. NOTE: Taylor reserves the right to deny warranty claims on equipment or parts if a non−approved refrigerant was installed in the machine, system modifications were performed beyond factory recommendations, or it is determined that the failure was caused by neglect or abuse.
  • Page 35 Notes: Parts Models 150, 152, 162, 168...

  • Page 36: Model 150 Exploded View

    Model 150 Exploded View Figure 9 160210 Parts Models 150, 152, 162, 168...
  • Page 37 Model 150 Exploded View Parts Identification ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. SHELL A.−INSULATED X58792−SER FAN−4 BLADE 11 ” PULL 028405 30DEG CW BEARING−REAR SHELL 023648 SHROUD−CONDENSER 047511−SPN COLLAR−BEARING−REAR 025564 SHROUD−CONDENSER 047508 TAB−BEARING LOCK 025027 CONDENSER−AC 046556 NUT−REAR BEARING 023647 12LX14HX1.87T 3RW...

  • Page 38: Model 150 Operator Parts Identification

    Model 150 Operator Parts Identification Figure 10 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. COVER A.−HOPPER X48690 DECAL−DEC 047667 TUBE−FEED−.166 HOLE−SS 035819 PANEL−UPPER SIDE RT 030784−SS FLOAT A.−MIX LEVEL X39690 LIGHT−AMBR−RND−12V−MIX 039707 PANEL−BACK TOP 050429 CASTER−3” SWV 4 HOLE/BRK 058500 PANEL−UPPER SIDE LEFT...

  • Page 39: Model 152 Operator Parts Identification

    047667 PANEL−REAR 051556 PANEL A.−FRONT X25036 PANEL−SIDE 051557 TRIM−FRONT 025862−SS PAN−DRIP 11−5/8 LONG 027503 TRIM−MIDDLE BACK PANEL 025860 LEG−4” 3/8−16 STUD−PLAST 024755 PLATE−DEC 041034−SS LIGHT−AMBER−ROUND−12V− 039707 HOLDER−DRIP TRAY 035866 MIX LOW PANEL−SIDE 051558 160210 Parts Models 150, 152, 162, 168...

  • Page 40: Model 152 Exploded View

    Model 152 Exploded View Figure 12 160210 Parts Models 150, 152, 162, 168...
  • Page 41 BRACKET- CONTROL- TMP 035461 SLEEVE- MT- COMP- AE 039920 HARNESS- TRANS RELY A. 083829- 27 GROMMET- COMPRESSR MT 039919 VALVE- ACCESS- 1/4 MFLX1/4 047016 CONDENSER- AC 046556 VALVE- ACCESS- 1/4FL X 1/4 044404 12LX14HX1.87T 3RW 160210 Parts Models 150, 152, 162, 168...

  • Page 42: Model 162 Exploded View

    Model 162 Exploded View Figure 13 Parts Models 150, 152, 162, 168...
  • Page 43 KIT-MOUNTING-COMPRESSOR 047704 SPRING-COMP.970X.115X2.00 025707 COMPRESSOR TL3G-R134A 047701- HINGE A.-MOTOR RIGHT X35899 CONTROL-TEMPERATURE 028914 HINGE A.-MOTOR LEFT X35900 VALVE-EPR 1/4S 022665 MOTOR-1/2 HP 024839- VALVE-ACCESS 1/4 FL X 3/8 044455 CONDENSER-AC-7X6X1.25 027155 CAP-RUBBER MOUNT 011844 Parts Models 150, 152, 162, 168...

  • Page 44: Model 162 Operator Parts Identification

    047276−SS PANEL−FRONT LEFT 035932−SS PANEL−SIDE−LEFT 050213−SS LEG−4.250” (WITH O−RING) 013458 PAN−DRIP 19−1/2 LONG 035034 PANEL−SIDE RIGHT 050214−SS PANEL A.−FRONT X30711 TRIM−PANEL−REAR 035923 LIGHT−AMBER−MIX LOW 039707 PLATE−DECORATIVE 039723−SS DECAL−DECORATIVE 047666 HOLDER−DRIP TRAY 035866 SHIELD−SPLASH 030789 Parts Models 150, 152, 162, 168...

  • Page 45: Model 168 Operator Parts Identification

    CASTER−3” SWIVEL (FRONT) 012227 PANEL A.−FRONT X30711 PANEL−LOWER SIDE 030792−SS LIGHT−AMBER MIX LOW 039707 TRIM−TOP BACK PANEL 030775 DECAL−DECORATIVE 047666 TRIM−MIDDLE BACK PANEL 030795 SHIELD−SPLASH 17−5/8 030789 PLATE−DECORATIVE 039723−SS TRAY−DRIP 16−7/8 030565 HOLDER−DRIP TRAY 035866 Parts Models 150, 152, 162, 168...

  • Page 46: Model 168 Exploded View

    Model 168 Exploded View Figure 16 Parts Models 150, 152, 162, 168...
  • Page 47 COVER-SPLICE BOX 028224 CONDENSER-AC-7X6X1.25 027155 LUG-GROUNDING 260 020928 SENSOR A.-MIX LEVEL X39688 SCREW-10-32 X 1/2 MF HEX 020982 FLOAT A.-MIX LEVEL X39690 NUT-10-32 MF LOCK 020983 BRACKET-TEMP CONTROL 020115 BOX A.-CAP&RELAY X50237- CONTROL-TEMPERATURE 028914 Parts Models 150, 152, 162, 168...

  • Page 48: Beater & Door A. (Models 150/152)

    Beater & Door A. (Models 150/152) Figure 17 Item Description Part No. Item Description Part No. Valve−Draw 024763 Door A.−1 Spout X38959−SER O−Ring−7/8 OD x .103 W 014402 Bearing−Guide 014496 O−Ring−3/4 OD x .103 W 015835 O−Ring−2−3/4 OD x .139 W 019998 Handle−Draw...
  • Page 49 Kit A.−Door 3 Spt 1.5 Qt. Valox X56906−SER Bearing−Guide 014496 Nut−Stud 056802 O−Ring−2−3/4 OD x .139 W 019998 Pin A.−Pivot Short X38539 Bearing−Front 023262 O−Ring−5/16 OD x .070 W 016272 Beater A. X24689 Handle−Draw Valve 030564 Seal−U−Cup 080534 130128 Parts Models 150, 152, 162, 168...

  • Page 50: Control A.−Upper − X51544−27 (Models 150 & 152)

    Control A.−Upper − X51544−27 (Models 150 & 152) Figure 19 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. MOUNT-CONTROL 068981 TRANS-CONT-ANTICIPATOR 010246- CONTACTOR 230VAC 1PH 055248-27 BRACKET-TRANSFORMER 041258 SCREW-8X1/4 SL HEX HD TYP B 009894 CHANNEL-CONTROL 029507- BLOCK-TERMINAL 5 POLE...

  • Page 51: Control A. − X51543−27 (Model 152)

    SCREW−8X1−1/4 PHLP HD RD B 039420 SCREW−8X1/4 SL HEX HD 009894 TIMER−CYCLE 5SEC 037188− ON/120SEC OFF RELAY−START−COMPRESS0R 048150 CAPACITOR−RUN− 15UF/370V 027087 BUSHING−SNAP 15/16 ID 023396 CAPACITOR−START− 72−88UF 039567 RELAY−3PDT−16AMP−1HP 062074−27 STRAP−CAPACITOR 5−5/8 IN. 030258 WASHER−#10 STEEL BACKED 051021 160212 Parts Models 150, 152, 162, 168...

  • Page 52: Control A. − X50146−27 (Model 162 Left)

    CAPACITOR-RUN- 15UF/370V 027087 STRAP-CAPACITOR U-SHAPE 035904 LABEL-COPPER COND ONLY 025948 SCREW-10-32X2 SLTD ROUND 051200 BLOCK-TERMINAL 2P-L1,L2 039422 RELAY-START-COMPRESSOR 048150 SCREW-8 X 1-1/4 RD HD TYP B 039420 RELAY-DPDT-20 A-230 V 026581- LUG-GROUNDING 260 020928 160212 Parts Models 150, 152, 162, 168...

  • Page 53: Control A. − X50147−27 (Model 162 Right)

    RELAY-DPDT-20 A-230 V 026581- STRAP-CAPACITOR U-SHAPE 035904 RELAY-3 POLE-20A-208/240 012725- SCREW-10-32X2 SLTD ROUND 051200 SCREW-8X1/4 SL HEX HD 009894 CAPACITOR-START- 72-88UF 039567 PANEL A.-CONTROL RIGHT X37191 RELAY-START-COMPRESSOR 048150 CAPACITOR-RUN- 15UF/370V 027087 BLOCK-TERMINAL 5 POLE 024329 160212 Parts Models 150, 152, 162, 168...

  • Page 54: Control A. − X51730−27 (Models 162 & 168 Front)

    009894 CONTROL-TEMPERATURE 028914 SCREW-8 X 7/8 TYPE B SLOT 026925 SWITCH A.-DRAW X32106 CONTROL-VISCOSITY-WATT 037260- SWITCH-PUSHBUTTON-SPST 016530 BRACKET-CONTROL 030807 ARM A.-SWITCH X30736 SCREW-6-32X3/8 BIN.HD SLOT 002201 SWITCH A.-MIX REFRIG. X51635 TIMER A.-CYCLE-14 MIN X31959- Parts Models 150, 152, 162, 168...

  • Page 55: Control A. − X50342−27L (Model 168 Left)

    Control A. − X50342−27L (Model 168 Left) Figure 24 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. SCREW-8X1/4 SL HEX HD TYP B 009894 BLOCK-TERMINAL 5 POLE 024329 RELAY-DPDT-20 A-230 V 026581- RELAY-3 POLE-20A-208/240 012725- BOX A.-CONTROL X47398 Parts Models 150, 152, 162, 168...

  • Page 56: Control A. − X50342−27R (Model 168 Right)

    Control A. − X50342−27R (Model 168 Right) Figure 25 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. SCREW-8X1/4 SL HEX HD TYP B 009894 BOX A.-CONTROL X47398 RELAY-DPDT-20 A-230 V 026581- BLOCK-TERMINAL 5 POLE 024329 RELAY-3 POLE-20A-208/240 012725- Parts Models 150, 152, 162, 168...

  • Page 57: Box A.−Cap & Relay − X50198−27 (Model 150)

    Box A.−Cap & Relay − X50198−27 (Model 150) Figure 26 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. RELAY−START−COMPRESSOR 048150 LABEL−WIRING SINGLE PHASE 036880−2 SCREW−8X1/4 SLTD HEX WASH 009894 CAPACITOR−RUN 15UF/370V 027087 SCREW−10X3/8 SLOTTED HEX 015582 CAPACITOR−START 039567 72−88UF/330V COVER−CAP.RELAY BOX...

  • Page 58: Relay A.- Timer Stir - X51685- 27 (Model 150)

    Relay A.- Timer Stir - X51685- 27 (Model 150) Figure 27 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. RELAY- 3PDT- 16AMP- 1HP 062074- 27 TIMER- CYCLE 5SEC 037188- SCREW- 8X1/4 SLTD HEX WASH 009894 SCREW- 10- 32X1 RHM ZP...

  • Page 59: Relay A.−Timer Stir − X51633−27 (Model 162)

    Relay A.−Timer Stir − X51633−27 (Model 162) Figure 28 ITEM DESCRIPTION PART NO. ITEM DESCRIPTION PART NO. RELAY-3PDT-10A-208/240V 023845- TIMER-CYCLE 5SEC ON/120SEC 037188- NUT-6-32 HEX 000927 SCREW-10-32X1 RHM ZP STEEL 004455 BRACKET-RELAY TIMER STIR 051634 NUT-10-32 MF LOCK 020983 Parts Models 150, 152, 162, 168...

  • Page 60: Relay A.−Timer Stir − X51323−27 (Model 168)

    NUT-10-32 MF LOCK 020983 RELAY-3PDT-10A-208/240V 023845- SCREW-10-32 X 1-1/4 TRUSS 032936 WASHER-#6 SHAKEPROOF 024541 CONNECTOR-BX 3/8 STR 014569 NUT-6-32 HEX 000927 SLEEVE-WIRE 1/2 I.D. X .031 022175- BOX-RELAY STIR 051704 CONNECTOR-BX 3/8 90D 001793 Parts Models 150, 152, 162, 168...
  • Page 61 PART WARR. REMARKS NUMBER QTY. QTY. QTY. QTY. CLASS BEARING-FRONT 023262 BEARING-GUIDE 014496 BEARING-REAR SHELL *150-52-68* 023648 +COLLAR-REAR BEARING 025564 +NUT-REAR BEARING *150-52-68* 023647 +TAB-BEARING LOCK *150-2-68* 025027 BEARING-UNIT REAR 024764 BEATER A. *150-2-162-168* X24689 +O-RING-13/16 OD X .139W 021278...
  • Page 62 CONDENSER-AC-9HX24WX2.5T-4 ROW 047146 CONDENSER-AC-15LX14HX2.57-4R 047255 CONTACTOR 120VAC 50/60HZ 055248-12 150/152 115V 60HZ 1PH - M0114949 & UP REPLACES 012725-12 & 066795-12 RELAYS CONTACTOR 230VAC 1PH 50/60HZ 055248-27 150/152 208-230V - M0114972 & UP REPLACES 012725-27 & 066795-27 RELAYS +RESISTOR A.-5K OHM 20 WAT X68908 150/152-12 S/N M0114949 &...
  • Page 63 DESCRIPTION PART WARR. REMARKS NUMBER QTY. QTY. QTY. QTY. CLASS DECAL-WASH-OFF-AUTO 014502 DIAGRAM-WIRING *150* 050416- DIAGRAM-WIRING 050205- DOOR A.-1 SPOUT-1.5 QT X38959-SER ROD A.-BAFFLE X57200 +O-RING-2-3/4 OD X .139W 019998 +ARM-VALVE LIFTER 024761 +HANDLE-DRAW 024762 +O-RING-3/4 OD X .103W 015835...
  • Page 64 QTY. QTY. QTY. QTY. CLASS GUARD-SWITCH *150-2* 025496 GUARD-POWER & DANFOSS SWITCH 035548 GUIDE A.-DRIP PAN X28593 HARNESS A.-WIRE *150*162*LQSOL X50224 HARNESS-TRANS RELAY A. 083829-27 HOLDER-DRIP TRAY*150-2-68-756M 035866 HOOD A. *150* X49063 HOOD A. *152* X49065 HOOD A. *162* X35918 HOOD A.
  • Page 65 150/152 K4126184 & UP - 162/168 DUAL POWER(115V 60 1PH) +CAPACITOR-RUN 35UF/370V 059756 +CAPACITOR-START 460-552UF/165V 059758 MOTOR-1/2 HP 059742-27 150 & 152 S/N K4126184 & UP REPLACES 024839- (208-230V 60 1PH) +CAPACITOR-RUN 10UF/370V 059998 +CAPACITOR-START 72-88UF/330V 059757 MOTOR-1/2 HP 024839-12 150/152 S/N K4126183 162/168 S/N K3020000 &...
  • Page 66 PAIL-6 QT. 023348 PAN-DRIP 11-5/8 LONG 027503 PAN-DRIP 19-1/2 LONG 035034 PAN-DRIP 17-1/4"LONG 027504 PANEL A.-FRONT *150-152* X25036 PANEL A.-LOWER FRONT *150* X25518 PANEL-BACK BOTTOM *150* 050430 PANEL-BACK TOP *150* 050429 PANEL-INSERT *150* 025533-SS PANEL-LOWER SIDE *150-168* 030792-SS PANEL-UPPER SIDE LEFT *150-68*...
  • Page 67 041162 BEATER MOTOR PULLEY-5.7" PITCH DIA X 5/8 041498 GEAR REDUCER RELAY-3 POLE 115V 066795-12 *NOT GOOD FIT FOR 150 & 152 SEE CONTACTOR RELAY-3 POLE 012725- N/A 150-12 & 152-12 USE 066795-12 OR -27 RELAY-3PDT-16AMP-1HP @120 VAC 062074-12 STIR CYCLE - 7-2-2013...
  • Page 68 051559 SHROUD-CONDENSER 047274 MAIN SHROUD-DANFOSS 027386 SHROUD-DANFOSS 051542 SHROUD-REAR 030779 SKIRT-AIR FLOW *162*HP62 049977 SKIRT-AIR FLOW *162/168* 050243 SWITCH A.-DRAW *150 SS W/TIMER X32245-SER ACTUATOR-SWITCH 032247 BRACKET-SWITCH *150* 032246 E-RING 5/16 016422 ROD-SWITCH *150-2* 029500 SPRING-COMP.480X.047X2.00 SS 025452 SWITCH-PLUNGER-SPDT15A125-250V 032260 SWITCH A.-DRAW *168*...
  • Page 69 010246-12 115V 60HZ 1PH TRANS.-CONT-ANTICIPATOR 10 VA 010246-27 208-230V 60HZ 1PH TRAY-DRIP 10-7/8 X 4-7/16 025062 TRAY-DRIP-16-7/8L X 4-3/8 030565 TRIM-MIDDLE BACK PANEL *150* 025537 TRIM-SIDE & FRONT *150* 025528 TRIM-TOP BACK PANEL *150* 025536 TRIM-FRONT-SS 025862-SS TRIM-TOP BACK *152*...
  • Page 70 080967 COMPRESSOR AKA9462ZXC-AK172JT 049302-40 230-50-1 +CAPACITOR-RUN- 15UF/370V 027087 230-50-1 +CAPACITOR-START- 72-88UF/330V 039567 230-50-1 +RELAY-START-COMPRESSOR 041064 230-50-1 DIAGRAM-WIRING *150/152* 050416-40 DIAGRAM-WIRING 050205-40S DIAGRAM-WIRING 050205-40 DUAL POWER LUG-GROUNDING 4-14GA WIRE 017667 +SCREW-1/4-20X5/8 SERRATED HWH 017522 +NUT-1/4-20 WHIZ FLANGE LOCK 017523 MOTOR-FAN 23.2W 50HZ 027817-34 +FAN-4 BLADE 11 "...
  • Page 71 DESCRIPTION PART WARR. REMARKS NUMBER QTY. QTY. QTY. QTY. CLASS DECAL-MAG-SLF SRV-TM-TWIN 044021 GUARD-POWER SWITCH 034830 GUARD-POWER & DANFOSS SWITCHES 035548 PCB A.-MIX LOW CHIME X41243SER1 115 AND 230 VOLT APPLICATIONS...

  • Page 72: Taylor Company

    Taylor Company Model 150/152 050416-12 11/15 2015 Carrier Commercial Refrigeration, Inc.
  • Page 73 Taylor Company Model 150/152 050416-27 11/15 2015 Carrier Commercial Refrigeration, Inc.
  • Page 74 Taylor Company Model 150/152 050416-40 11/15 2015 Carrier Commercial Refrigeration, Inc.
  • Page 75 LEFT POWER SUPPLY LEFT MAIN LEFT MAIN LEFT MAIN BLK CORD BLK CORD COMPRESSOR COMPRESSOR COMPRESSOR CONTACTOR (FIG. 3) CONTACTOR MAIN CONDENSER FAN WHT/ORN ONLY.) (ONE (1) FAN MOTOR ONLY FOR MODEL 168. RUN CAPACITOR APPLIES TO MODEL 168 LEFT MAIN COMPRESSOR CONTACTOR WHT/GRA...
  • Page 76 NOTES: 1. ONE (1) FAN ONLY ON MODEL FIG. 1 168. RUN CAPACITOR APPLIES TO MODEL 168 ONLY. START RELAY (047702-27) START CAPACITOR (047703) STANDBY TEMP START WINDING CONTROL MAIN WINDING 3PDT SHR SW. WINDING PROTECTOR BLACK/WHITE STRIPE WHITE/BLK STR (INTERNAL) STANDBY COMPRESSOR WIRING...
  • Page 77 POWER SUPPLY GRN/YEL GRN/YEL GRN/YEL GRN/YEL LEFT MAIN LEFT MAIN LEFT MAIN BLK CORD BLK CORD COMPRESSOR COMPRESSOR COMPRESSOR GRN/YEL CONTACTOR (FIG. 3) CONTACTOR MAIN CONDENSER FAN ONLY.) (ONE (1) FAN MOTOR ONLY FOR MODEL 168. RUN CAPACITOR APPLIES TO MODEL 168 LEFT COMPRESSOR "ON"...

This manual is also suitable for:

152162168

Table of Contents