How to use this device
50/88
Acrylic panel
Cosmetics may cause cracks to form on the surface!
Over the long-term cosmetics or sunscreens cause damage (e.g. crack for-
mation on the surface).
–
Ensure that cosmetics and sunscreens are removed before tanning.
The acrylic panels for the tanning devices are produced of acrylic glass de-
veloped especially for this application. The acrylics used feature a particularly
high UV permeability and resistance, as well as an easy-care, hygienic sur-
face that is gentle on the skin.
The acrylic panels are formed to device-specific shapes in a technically com-
plex production process. Despite state-of-the-art production know-how, the
presence of minor spots, air bubbles or streaks in the acrylic panels is una-
voidable. In addition, hairline cracks can occur on the acrylic panel during
operation.
These occurrences are material-related and are unavoidable in processing.
However, they have no significant effect on use and are therefore not accept-
ed as defects.
Over the course of time the acrylic panel will become discolored as a result of
usage and must be replaced by customer-service personnel on a regular
basis.
The optional partition (only for devices with an air conditioning unit) works as
a UV filter and must be replaced by customer-service personnel on a regular
basis.
12.15
How to clean/disinfect
Infections can be transferred through skin contact.
All items/equipment components, with which the user can
come into contact during tanning, must be cleaned and
disinfected after every tanning session:
–
Protective goggles
–
Acrylic panels
–
Handles and control panel
–
AUX cable
–
Adjustable air nozzles
–
Use only EPA registered quaternary ammonium germi-
cidal based detergent solution (follow product label for
use-dilution), such as Lucasol One Step, to clean and
disinfect the tanning system and its components.
NOTICE
WARNING!