Table of Contents
Advertisement
How to use this device
46/88
12.12
How to use
NOTE:
Before use the device must always be cleaned and disinfect-
ed! See chapter 12.15 How to clean/disinfect.
12.12.1
How to start
The device is started automatically with an internal or external timer.
NOTE:
See separate document 'Timer Control Module' #1008370-..
in the Technical Documentation folder.
Preparation time
Before the lamps turn on, you have a few minutes to prepare yourself. During
the preparation time you can switch on the lamps at any time by pressing the
START/STOP button.
–
Remove your clothes and all jewelry.
–
Remove make-up and other cosmetics.
–
Remove glasses. Contact lenses can be worn under the protective gog-
gles.
–
Put on the protective goggles.
–
Lie down on the bed surface.
–
Close the canopy.
–
Press the START/STOP button.
Settings on start-up:
Lamps
Facial tanners
Body cooling
Face cooling
Audio system
12.12.2
Application tips
Tanning device
When describing the operation, the tanning device is often shown with the
canopy open. During tanning the canopy must always be closed.
Proper operation is not possible with the canopy open.
–
Lie down and place your head on the headrest or as indicated by the
ergonomic base panel to maintain the proper distance between skin and
lamps.
Advertisement
Table of Contents
