Table of Contents
Advertisement
10/2020
1006351-04B
Environmental conditions
Optimum ambient temperature:
between 59 °F (15 °C) and 89.6°F (32°C)
Storage temperature: between 5 °F (-15 °C) and 140 °F (+60 °C)
Air pressure: between 794 hPa and 1060 hPa
Relative humidity: between 30 % and 70 %
Please contact the customer service department before putting the device into
operation - see page 2.
3.8.3
Commissioning
DANGER!
Damaged mains power cable!
Danger to persons through electric shock or burns.
–
Only the manufacturer or specialist companies are
permitted to replace the mains power cable.
Initial commissioning will be undertaken by the manufacturer's own service
personnel or by a (Level 3) JK Factory Certified Technician. The device will
be handed over ready for use.
As the studio operator you are responsible for abiding by the electrical regula-
tions applicable at the installation site.
The unit incorporates special preventive measures with regard to the electro-
magnetic compatibility and must be installed and commissioned according to
the EMC instructions obtained from the assembly instructions.
If the device has not been operated or serviced for a period of one year or
longer, it must first be inspected by a (Level 3) JK Factory Certified Techni-
cian before being put back into operation. Failure to do so may result in per-
sonal injury or property damage.
What this device is
Operating Instructions – 17/88
Advertisement
Table of Contents
