How To Clean/Disinfect - ergoline Beauty Angel 7200 Operating Instructions Manual

09/2018 1019179-00A
12.15

How to clean/disinfect

Infections can be transferred through skin contact.
All items/equipment components, with which the user can
come into contact during application, must be cleaned and
disinfected after every session:
– Protective goggles
– Floor mat (silicone)
– Entry area
– Handles and control panel
– MP3 cable
– Use only EPA registered quaternary ammonium germi-
cidal based detergent solution (follow product label for
use-dilution), such as Lucasol One Step, to clean and
disinfect the beauty system and its components.
NOTE:
For thorough cleaning and disinfection, the product must be
allowed to remain in contact with the surface being cleaned
and disinfected for a specified amount of time.
This specified amount of time depends on the cleaner/
disinfectant which is used. Follow the directions for use of the
cleaner/disinfectant.
After this specified application time remove remaining clean-
er/disinfectant from the surfaces of the device. Use a single-
pass paper towel.
How to use this device
WARNING!
Operating instructions – 55/92