Table of Contents
Advertisement
Remove the document(s) from the ADF.
3
4
5
Hang up the handset.
The machine starts receiving the document(s).
Substitute Memory Reception
If recording paper runs out, jams, or if the toner runs out during reception, the machine automatically starts
receiving documents in its image data memory. Stored documents will be printed automatically after the
recording paper or the toner has been replenished or the jam has been cleared.
When the machine completes the memory reception and there is no
1
recording paper or toner, this error message appears on the display.
Replenish the recording paper, toner or clear the jam.
2
The document(s) stored in memory will be automatically printed.
12
Print Collation Mode
The printing mechanism of the machine is Reverse Order Stacking construction. The machine has Print
Collation Mode that stacks received documents in correct order. When the Print Collation Mode is set to
"2:Valid", all received documents are stored in memory first, then printed out in Correct Order Stacking.
ATTENTION
• The requirements for the Print Collation Mode to be active are:
1) Fax Parameter No.65 (PRINT COLLATION) set to "2:Valid".
2) Enough memory remaining.
NOTE
1. If memory overflows, the machine will stop receiving and will release the communication line.
The document(s) stored in memory up to that moment will be printed out.
2. If you wish to turn off the substitute reception function, set Fax Parameter No.22 (SUBSTITUTE RCV) to "1:Invalid". (See
page 154)
Receiving Documents
ON LINE * RCV *
(See Notes 1 and 2)
MESSAGE IN MEMORY
03%
31
Advertisement
Table of Contents
