Table of Contents
Advertisement
Job Build
The Job Build setting enables you to scan sets of documents that exceed the maximum capacity of the ADF.
Special documents (thin paper, etc.) can be fed from the ADF one by one for Memory transmission. This
function is available when Fax Parameter No.133 (JOB BUILD) is set to "2:On". (See page 158)
ATTENTION
• This function is available when Fax Parameter No.5 (MEMORY (HOME) ) is set to "2:On". (See page 153)
• Fax Parameter No.82 (QUICK MEMORY XMT) is not available for this function.
• Up to 255 pages can be stored. When the number of pages exceeds 255, the memory overfull message
will be displayed. Select "Yes" to start transmitting, or "No" to cancel.
If no action is taken within 5 seconds, the machine will start transmitting the stored documents.
Documents:100 sheets<first scan>
Documents:Remaining 50 sheets<second scan>
123
1
Ex: 100 sheets
Enter the Telephone Number. (See Pages 15-19)
2
Ex: T (TOSHIBA:Quick Name Search Dialing)
3
• If you place the documents within 5 seconds after the first
scan, the next scan will start without displaying any notice.
NOTE
1. Job Build features are not available if the Duplex sending is selected.
2. If you do not place the next documents within 5 minutes in Step 3, your machine will send the documents already scanned
automatically.
3. Up to 100 pages can be scanned at one time. A maximum of 255 pages can be stored for each job. 255 pages can be
stored only when memory overflow does not occur while storing documents into memory.
Continued on the next page...
1
100
First and second scanned data
101
is combined into one job
150
Set document(s) face up.
Sending Documents
1
150
150 sheets are sent at
one time (up to 255 sheets)
TOSHIBA
335
ANOTHER ORIGINAL?
1:YES 2:NO
25
Advertisement
Table of Contents
