Table of Contents
Advertisement
Password Communications
Using Password Transmission
To use Password Transmission, you can select PASSWORD-XMT "1:Off" or "2:On" for each Transmission
by following the procedure below.
1
2
3
4
5
6
Using Password Reception
There is no additional operation required once you set the parameter by the following procedure. (See page
45)
The parameter, "1:Off" or "2:On", cannot be selected for each reception. It is always "1:Off" or "2:On" until
you change the setting.
46
Set document(s) face up.
Press
or
, then press
Enter the station by any combination of the following methods:
• Quick Name Search Dialing (See page 15)
• One-Touch Dialing (See page 16)
• ABBR. Dialing (See page 17)
• Manual Number Dialing (See page 18)
• Directory Search Dialing (See page 18)
Ex: T (TOSHIBA:Quick Name Search Dialing)
If your machine's Transmission Password coincides with the other
station's Transmission Password, your machine starts sending the
document.
When the transmission is completed, PASSWORD-XMT returns to
standard setting ("1:Off" or "2:On").
.
FUNCTION
(1-9)
ENTER NO. OR
PASSWD-XMT=OFF
1:OFF 2:ON
ENTER STATION(S)
THEN PRESS START 00%
TOSHIBA
5551234
Advertisement
Table of Contents
