Toshiba e-studio 191F Operating Instructions Manual page 158

Customizing Your Machine
1
No.
126 USER AUTH
Copy
Fax
Printer
Scanner
132 VIA FAX SERVER
133 JOB BUILD
135 01 JUNK FAX FILTER
02 RCV WITHOUT ID
03 RECEIVED ID PRINT
04 ID NO. REGIST.
136 RESTRICT D. DIAL
NOTE
1. The setting numbers marked with an asterisk (*) indicate the factory default setting.
158
Parameter
*1
2
*1
2
*1
2
*1
2
1
*2
1
*2
*1
2
Invalid Selecting whether use the User Authentication function for
Copy, Fax, Printer, and Scanner.
Valid
Invalid Selecting whether use the FAX Server.
Valid
Off Selecting whether the machine performs Job Build when the
total number of documents exceed the maximum capacity of
On
the ADF, or when scanning the documents manually one at
a time. (See page 25)
The Fax Parameter No.82 (QUICK MEMORY XMT) is not
available when the Job Build is set to "2:On".
Invalid Selecting whether the machine performs Junk Fax Filter
function. If the setting is set to "Valid", the machine disallows
Valid
faxes from the senders whose numeric ID is registered as a
junk fax number.
Invalid Selecting whether the machine allows fax reception from
senders without numeric ID being registered.
Valid
This feature is available when "01 Junk Fax Filter" is set to
"2:Valid".
Invalid Selecting whether the machine prints the sender's numeric
ID and received time at the bottom of the received faxes. If
Valid
the sender's numeric ID is not registered, only the received
time is printed.
This feature is available when "01 Junk Fax Filter" is set to
"2:Valid".
(----) Registering a junk fax number.
Up to 30 junk fax numbers can be registered.
Up to 20 digits (including numbers, blank space, and +
symbol) can be registered for a fax number.
Invalid Selecting whether the machine allows a manual input of the
destination and the use of the Redial button.
Valid
If the setting is "2:Valid", manual input of the destination and
the Redial button are not available.
The Fax Parameter No.137 (RE-ENTER D. DIAL) is not
available when the Restrict Direct Dial is set to "2:Valid".