Receive to Memory
Setting Receive to Memory Password
1
2
3
4
5
Setting the Receive to Memory
12
1
2
3
NOTE
1. To change the password, press
2. Once the RCV TO MEMORY feature is set to "2:On", the password cannot be changed (Fax Parameter No.37 (RCV TO
MEMORY) will not be selectable on the LCD display). If you wish to change the password, set the Select Mode (Function
8-5 (RCV TO MEMORY)) to OFF. Then change the password.
52
Enter the Key Operator ID using the Number Pad, then press
Enter the Receive to Memory Password using the Number Pad (8
digits), then press
.
in Step 5. Then re-enter a new one and press
FUNCTION
(1-9)
ENTER NO. OR
KEY OPERATOR ID CODE
ENTER ID=
FAX PARAMETER(1-187)
.
NO.=
37 RCV TO MEMORY
FUNCTION
(1-9)
ENTER NO. OR
RCV TO MEMORY=OFF
1:OFF 2:ON 3:PRINT
.