Table of Contents
Advertisement
Customizing Your Machine
Fax Parameters
Your machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter Table,
are preset for you and do not need to be changed. If you want to make a change, read the table carefully.
Some parameters, such as the Resolution and Contrast Parameters, can be temporarily changed by simple
key operation just before a transmission is made. When the transmission ends, however, these parameters
return to their preset values (home position). Other parameters can only be changed by the procedure
described below.
1234
1
2
3
4
5
6
NOTE
1. To scroll the Fax Parameters in Step 4, press
2. To print out a Fax Parameter List. (See page 183)
3. Fax Parameter setting mode is accessible only when the machine is in the Ready Mode.
4. The default ID is "00000000". To change the ID, set User Parameter (KEY OPERATOR ID CODE).
152
Enter the Key Operator ID using the Number Pad, then
press
. (See Note 4)
Enter the Fax Parameter number from the Parameter table using the
Number Pad, then press
Ex: 004 (See Note 1)
Change setting to using the Number Pad.
Ex: 2 for "ON"
To set another parameter, press
To return to standby, press
.
to return to Step 4.
.
or
.
FUNCTION
(1-9)
ENTER NO. OR
KEY OPERATOR ID CODE
ENTER ID=
FAX PARAMETER(1-187)
NO.=
04 STAMP(HOME)
1:OFF
04 STAMP(HOME)
2:ON
Advertisement
Table of Contents
