Table of Contents
Advertisement
Programming Auto Dialer
Your machine has 2 types of Auto Dialers. The default dialer can be selected by changing the setting of Fax
Parameter No.119 (QWERTY KEYBOARD).
When the setting is set to:
"1:One-Touch": You can manually select the desired One-Touch Key, ABBR. Dialing and the Program Key.
"2:Quick Name Search": You can select the station by searching the Station Name, and the Program Name.
1234
ATTENTION
• The required six (6) Basic Internet Parameters must be set when setting Email Address. (See page 134)
• Up to 580 stations, plus additional 420 with the optional SD Memory Card installed. (See page 189)
Programming Address Book
1
2
3
To change the input mode (between enter Email Address and
4
Telephone Number), press
Enter the Telephone Number using the Number Pad (up to 36 digits)
5
or the Email Address using the QWERTY Keyboard (up to 60
characters), then press
Ex: 335 or admin@toshiba
Enter the Station Name using the QWERTY Keyboard (up to 15
6
characters), then press
NOTE
1. Use
to enter a space between the numbers to make it easier to read.
2. Use
or
to move the cursor beyond the incorrect character, press
3. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
(Tone) (represented by a"/"). The dialing method will be changed from Pulse to Tone after dialing the digit "/".
4. When using Address Book Dialing, you cannot use ABBR. Number Dialing.
Continued on the next page...
.
.
.
FUNCTION
ENTER NO. OR
ADDRESS BOOK
ENTER NO. OR
ADD STATION
ENTER TEL. NO.
ENTER NAME
335
ENTER NAME
admin@toshiba
ADD STATION
ENTER TEL. NO.
ADD STATION
ENTER EMAIL ADDRESS
then re-enter the new character.
(1-9)
(1-3)
137
Advertisement
Table of Contents
