Table of Contents
Advertisement
Substitute Memory Reception
If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically
starts receiving documents into its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
1
When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
2
Install the recording paper (see page 18) or replace the
toner cartridge (see page 16).
The machine will automatically start printing the document
stored in the memory.
Print Collation Mode
The printing mechanism of the e-STUDIO50F is a Reverse Order Stacking construction. The e-STUDIO50F
has a Print Collation Mode that stacks received documents in the correct order. When the Print Collation
Mode is enabled, all received documents are stored into memory first, then printed out in Correct Order
Stacking. The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT
COLLATION set to "Valid", and 2) enough remaining memory.
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.
Sending Document Order
1
2
3
1 If the memory overflows, the machine will stop receiving and release the communication line.
NOTE
The document(s) stored in the memory up to that moment will be printed out.
2 If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No. 22 to "Invalid". (See page 36)
Receiving Documents
Stacking Document Order
Correct Order Stacking
(Collation Mode)
1
2
3
NO REC.PAPER 010
OUT OF TONER 041
* PRINTING *
Reverse Order Stacking
(Non-Collation Mode)
3
2
1
67
Advertisement
Table of Contents
