Table of Contents
Advertisement
Setting Your Machine
Setting the Internet Parameters
Basic Parameters for Internet Fax/Email Features
The following five (5) Basic Parameters must be pre-programmed into the machine.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the DNS Server
• Email Address of your machine
• Name or IP Address of the Default SMTP Mail Server
ATTENTION
• If it is required the setting other than DHCP Server Network settings, Fax Parameter No.169 (DHCP
CLIENT) should be set to "1:Invalid" first, then set up Parameters No.6 to 8. (See page 135)
• If you change the settings of the TCP/IP Address, Email Address, or other parameters of your machine,
the machine will reboot automatically.
12
1
2
3
4
5
6
NOTE
1. Use
or
2. The default ID is "00000000". To change the ID, setting the User Parameter (KEY OPERATOR ID CODE).
134
Enter the Key Operator ID using the Number Pad, then
press
. (See Note 2)
Set the desired Basic Parameter to use
Enter the parameters using the Number Pad or QWERTY Keyboard,
then press
.
Ex: 123.178.240.3
(Press
or
You can now set the parameters listed below by repeating the
procedures from Step 4.
to move the cursor beyond the incorrect character, press
or
.
for the period "." )
FUNCTION
ENTER NO. OR
KEY OPERATOR ID CODE
ENTER ID=
DATE & TIME
10-10-2008 11:11
IP ADDRESS
IP ADDRESS
123.178.240.3
then re-enter the new character.
(1-9)
Advertisement
Table of Contents
