Sending Documents Via An Internet Relay - Toshiba e-studio 191F Operating Instructions Manual

Sending Documents via an Internet Relay

To a Location that has a Programmed Relay Station
Once you have set all the necessary parameters in your machine, you can send a document to one or
multiple G3 fax machines automatically through the Internet Relay Station by using the following procedure.
The Internet Relay Station must have all the required parameters setup.
12
1
Enter the station by any combination of the following methods:
2
• Quick Name Search Dialing / Email Addressing
(See page 15)
• One-Touch Dialing / Email Addressing (See page 16)
• ABBR. Dialing / Email Addressing (See page 17)
• Directory Search Dialing / Email Addressing (See page 18)
Ex: STOCKHOLM
The document(s) is (are) stored in memory and your machine starts sending the document(s) to
3
the Relay Email Address of the Relay Station with the Telephone Number for the End Receiving
Station.
Ex: End Receiving Station : 4681111234
Relay Station
After the Relay Station completes its transmission to the End Receiving Station(s), your machine
receives a COMM. Journal from the Relay Station.
This Journal confirms whether the Internet Relayed Transmission is successful.
NOTE
1. The "#" character is not available for the Email Address of the relay station.
2. If the Relay Station requires a special access number to get an outside line, enter that access number first, then press
to enter a pause (represented by a "-") before entering the full number.
Set document(s) face up.
(Telephone number)
(
see Note 1)
:uk-rly@london.toshiba.co.uk
Relayed Transmission
STOCKHOLM
4681111234
113