Re-Entering Dialing - Toshiba e-studio 191F Operating Instructions Manual

Preventing Accidental Transmission to Wrong Destinations

Re-entering Dialing

This function enables you to re-enter the Telephone Number when specifying the destination for Manual
Number Dialing. Transmission takes place only when the second telephone number corresponds with the
first one. Follow the procedure below.
ATTENTION
• This function is available when the setting of Fax Parameter No.137 (RE-ENTER D. DIAL) is set to
"2:Valid". (See page 159)
12
1
2
3
4
5
NOTE
1. When using an external telephone, the screen that appears when re-entering the Telephone Number does not appear.
2. When Fax Parameter No.136 (RESTRICT D. DIAL) is set to "2:Valid", the screen that appears when re-entering the Tele-
phone Number does not appear.
28
Set document(s) face up.
Enter the Telephone Number using the Number Pad.
Ex: 336
Enter the Telephone Number using the Number Pad again.
Ex: 336
Transmission takes place only when the entered destinations
matches.
• When the numbers do not correspond, operate again from
entering the first telephone number.
TEL. NO.
336
RE-ENTER TEL. NO.
RE-ENTER TEL. NO.
336