Changing the Paper Guide from Letter to Legal
1
Push down the bottom plate of the tray until it
stops.
Changing the Original Size
Changing the Default Original Size (For Copier)
1
2
3
Enter the Key Operator ID using the Number Pad, then press
4
Continued on the next page...
Changing the Default Setting
2
Press the two outside tabs of the Paper Guide
inward to pull out the Paper Guide. Slide the
Paper Guide to the Legal size paper hole and
snap the Paper Guide into place.
.
COPIER PARAM.(09-19)
ENTER NO.
OR
19 KEY OPERATOR MODE
ENTER ID=
KEY OPR.MODE (00-13)
ENTER NO.
OR
ORIGINAL SIZE
LTR
171