Maintenance And Service; Maintenance Intervals; Service; Dismount The Brake - KEB COMBISTOP 38 Instructions For Use Manual

Hide thumbs Also See for COMBISTOP 38:

Table of Contents

MAINTENANcE AND SErvIcE

9 Maintenance and service

► Observe the general safety instructions.

► Disconnect the brake from the power supply during maintenance and repair work.

► Protect electrical and electronic components from splash water.

Due to its design, the COMBISTOP Type 38 brake can only be checked when it has been

removed. When properly designed, the COMBISTOP Type 38 brake is maintenance-free.

Service is required if, in accordance with the fault table, there are symptoms of damaged

or soiled linings, unusual noises or smells.

cAUTION

Figure 20:

► Disconnect the connecting cables from the voltage supply.

► If necessary, dismount the fan from the shaft (=> instruction manual of the motor).

► Loosen and remove the three socket head screws alternately piece by piece.

► Remove the brake from the shaft backwards.

Limbs crushed!

Securing the load!

► Mechanically secure the load against unintended movement.

► Release brake from load.

► Dismount the brake according to the manual.

Dismount the brake

Table of Contents