Observe During Mounting; Mount Brake - KEB COMBISTOP 38 Instructions For Use Manual

MOUNT brAKE

4.1.2 Observe during mounting

During mounting, please observe the following notes/instructions:
► The friction surfaces of the brake must not come into contact with oil, grease, water
► Never use aggressive fluids (for example, cleaning agents) or the like to clean the
► When mounting the hub and the magnetic system, the teeth of the hub and the
► The lining must be easily movable on the hub.
► The movement of the armature must not be impeded by the ingress of foreign parti-
► The eccentricity of the mounting hole circle relative to the shaft end must not ex-
► The angular deviation of the mounting surface relative to the shaft must not exceed
4.2 Mount brake
NOTICE
or other fluids. Any contamination will result in loss of torque.
brake.
lining must not be damaged.
cles into the air gap. Take appropriate safety measures as required.
ceed the following values:
cOMbISTOP 38
Eccentricity / mm
the following values (in relation to the mounting hole diameter):
cOMbISTOP 38
Angular deviation / mm
No suitable friction surface available!
► Optionally mount flange or friction disc on motor bearing shield.
02 03...06
0.2 0.4
02...03 04...05 06...07
0.04 0.05 0.06
07...10 11
0.5 0.6
08...10 11
0.08 0.1
27