Dismounting; Mounting; Connecting The Microswitch; Figure 12: Strands For The Microswitch - KEB COMBISTOP 38 Instructions For Use Manual

MIcrOSWITcH (OPTION)

4.3.3.1 Dismounting

► Remove the two socket head screws.
► Remove the microswitch.

4.3.3.2 Mounting

► The microswitch is mounted in reverse order.
► Connect the microswitch according to the following connection diagram:

4.3.3.3 Connecting the microswitch

Connect the microswitch as a normally open contact (terminal 1 and 4).
Legend
1
2
4
Figure 12:
Check the switching point of the microswitch after installation. If an adjustment of the
microswitch is necessary =>
Ground (black)
NC contact (brown)
NO contact (red)
Strands for the microswitch
„4.3.3.4 Adjustment of the microswitch".
33