Type Code; Table 1: Type Code - KEB COMBISTOP 38 Instructions For Use Manual

PrODUcT DEScrIPTION

2.4 Type code

The type designation and the version can be taken from the nameplate or the marking.
x x 3 8 x x x - x x x x
Table 1:
1)
Variant
Design
Hand release
Type
Size
Type code
Supplied with ready-to-install presetting of the air gaps.
The type codes are not used as order codes, but only for identification purposes.
The complete material number is not printed on the brake. Only the magnet is
marked with a material number. An assignment of the coupling based on the
magnet marking is only possible to a limited extent.
Customer versions
N / DEN: Dynamic application
H / DEH: Static application
DDN /
Double brake
1)
DDH:
11: Without hand release
13: With hand release
COMBISTOP Type 38
02...11
15