Table of Contents
Advertisement
Restoring the factory settings
(Factory Reset)
You can restore the VF-1 to its factory settings. This
operation is called "Factory Reset."
When you perform the Factory Reset operation, all data that
was saved will be returned to the factory settings. If you have
already saved data that you wish to keep, use Bulk Dump (p.
125) to save the data on an external MIDI device (sequencer
or the like) before performing the factory reset.
The following types of factory reset are available.
ALL:
All data of the VF-1 will be restored to the factory settings.
UTILITY:
All of the Utility data will be restored to the factory settings.
PATCH:
All the user bank patches (UA1–100, UB1–100) will be
restored to the factory settings.
fig.6-101
1. Press [UTILITY].
fig.6-08
2. Rotate [VALUE] to select "FACT RESET."
3. Press [ENTER].
4. Rotate [NUMBER] to select the data that will be restored
to the factory settings.
fig.6-09
1
2,3,4,5,6
5. Press [ENTER].
A message will ask you to confirm that you really want to
execute the Factory Reset operation.
fig.6-20
To halt the Factory Reset operation, press [EXIT].
6. When you press [ENTER], the Factory Reset operation
will be executed.
When the factory reset has been completed, the display will
indicate "Complete !," and you will return to Play mode.
Never turn off the power while the display shows "KEEP
POWER ON !" If the power is turned off while this display is
shown, the VF-1 may malfunction or its data may be lost.
Section 6. Appendices
133
Advertisement
Table of Contents
