Appendices; Restoring The Factory Settings (Factory Reset); List Of Factory Settings - Boss GT-PRO Owner's Manual

Appendices

Restoring the Factory
Settings (Factory Reset)
Restoring the GT-PRO to the settings made at the factory is
referred to as "Factory Reset."
Not only can you return all of the settings to the values in
effect when the GT-PRO was shipped from the factory, you
can also specify the range of settings to be reset.
fig.11-0010
2
1. Turn off the power.
2. While holding down PREAMP/SPEAKER On/Off
button and [TYPE VARIATION], turn on the power.
The Factory Reset range setting screen appears in the
display.
fig.11-0020d
The range of data you wish to factory reset
* To cancel Factory Reset, press [EXIT].
3. Press PARAMETER [
and rotate the PATCH/VALUE dial to specify the range
of settings you want to restore to factory settings.
value Explanation
System
System parameters, Harmonist scales, Auto Riff phrases, and
Preamp/Speaker, Overdrive/Distortion, and Wah Custom Edit
parameter settings
Quick
Content of the Settings Made with User Quick Setting
#1-1–#20-10
Settings for Patch Number 1-1 through 20-10
4. If you want to proceed with the factory reset, press
[ENTER].
The specified range of data will be returned, and return
to the Play screen.
3
4 1
] [ ] to move the cursor,

List of Factory Settings

Parameter
TUNER
TUNER Pitch
TUNER Out
OUTPUT SELECT
MAIN Output Sel.
MAIN Low EQ
MAIN Mid EQ
MAIN Mid Freq
MAIN High EQ
TOTAL NS Thres
TOTAL Rev Level
SUB Output Sel.
SUB Low EQ
SUB Mid EQ
SUB Mid Freq
SUB High EQ
Output Channel
USB/DGT Out Ch.
USB/DGT Out Lev
USB Mix Channel
USB Mix Level
SYSTEM
LCD Contrast
Input Select
Input Level
Input Pres.
P.Chnge Mode
Preamp Mode
Patch Extent
Assign Hold
Knob Mode
EXP1 Func
CTL1 Func
CTL2 Func
EXP2 Func
CTL3 Func
CTL4 Func
CC#7 Func
CC#80 Func
CC#1 Func
Main Out Lev
Sub Out Lev
LP Send Lev
LP Retrn Lev
FC-200
Mode
Ctl Pedal
Bank Lmt
PC Out
Bank Chng
Value
A= 440Hz
Bypass
LINE/PHONES
0dB
0dB
500Hz
0dB
0dB
100%
LINE/PHONES
0dB
0dB
500Hz
0dB
PATCH
MAIN
100
MAIN
100
16
Guitar In
0dB
0dB
Fast
Patch
P40-10
On
Immediate
Auto
Assignable
Assignable
Assignable
Assignable
Assignable
Auto
Assignable
Assignable
+4dBu
+4dBu
-10dBu
-10dBu
Off
Momentary
39
Wait for a NUM.
Bank Pedal Only
103