Pb12 Reverb 1 - Boss VF-1 Owner's Manual

Algorithm list
P 12 REVERB 1
B
fig.4-236
Input L
Input R
This simulates the reverberation of a room or hall. A delay can also be used simultaneously.
In this Algorithm, what you have set with the DIRECT MIX (p.46) will have effect.
4BAND EQ (Equalizer)
EFFECT OFF, ON
LOW EQ -20–+20 (dB)
HIGH EQ -20–+20 (dB)
LEVEL -20–+20 (dB)
LO-MD F 100–10.0 k (Hz)
LOW-MID Q 0.5–16.0
LOW-MID EQ -20–+20 (dB)
HI-MD F 100–10.0 k (Hz)
HI-MID Q 0.5–16.0
HI-MID EQ -20–+20 (dB)
REVERB
EFFECT
ROOM SIZE
REVERB TIME
BALANCE DIR:FX
EFFECT LEVEL
PRE DELAY
DENSITY
EARLY REF LEVEL
RELEASE DENSITY
LOW DAMP GAIN
LOW DAMP FREQUENCY
HIGH DAMP GAIN
HIGH DAMP FREQUENCY
HIGH CUT FILTER
66
4BAND EQ
FV
OFF, ON
5.6–32.6 (m)
0.1–32.0 (sec)
100:0–0:100
0–100
0–200 (msec)
0–100
0–100
0–100
-36.0–0.0 (dB)
55–4.0 k (Hz)
-36.0–0.0 (dB)
4.0 k–20.0 k (Hz)
200–20.0 k (Hz)
REVERB
DELAY
Output R
DELAY
EFFECT OFF, ON
TYPE SINGLE, 3TAP
(SINGLE)
DELAY TIME 0–1800 (msec), BPM:
FINE TIME 0–20 (msec)
FEEDBACK 0–100
FX LEVEL 0–120
HIGH DAMP GAIN -50–0 (dB)
HIGH CUT FILTER 700–11 k (Hz), FLAT
(3TAP)
DELAY TIME [C] 0–1800 (msec), BPM:
FINE TIME [C] 0–20 (msec)
TIME [L] 1–400 (%)
TIME [R] 1–400 (%)
FEEDBACK 0–100
LEVEL [C] 0–100
LEVEL [L] 0–100
LEVEL [R] 0–100
FX LEVEL 0–120
HIGH DAMP GAIN -50–0 (dB)
HIGH CUT FILTER 700–11 k (Hz), FLAT
MASTER
<MASTER>
LEVEL 0–100
BPM 40–250, MIDI, GLOBAL
<FV: FOOT VOLUME>
FOOT LEVEL 0–100
Output L