Table of Contents
Advertisement
The function of each parameter
RSS PANNER
RSS PANNER can make the sound seem to revolve around
the listener.
EFFECT
This parameter turns the RSS PANNER effect on/off.
SPEED
This parameter adjusts the speed with which the position of
the sound moves.
* If this is set to BPM, the MASTER BPM (p.105) setting for
each patch will determine the rate, so that the effect sound will
match the song tempo. However, if the BPM value is high, the
effect will synchronize to 1/2 or 1/4 of the BPM.
DIRECTION
This parameter selects the sound's direction of rotation.
CW (clockwise):
Rotates the sound clockwise, looking down from above.
CCW (counterclockwise):
Rotates the sound counterclockwise, looking down from above.
RSS (2ch)
RSS (Roland Sound Space) is an effector that creates a three-
dimensional sonic field. RSS can let you orient the sonic
image at a position above, below, before, behind, or to one
side or the other of the listener.
* To get the most out of the effects that RSS can provide, be sure
to read "Before using RSS" (page 121).
EFFECT
This parameter turns the RSS (2ch) effect on/off.
AZIMUTH [L]
AZIMUTH [R]
This parameter moves the sound horizontally along the
perimeter of an imaginary sphere. The setting can be made
within a range of about 180 degrees to the left or right, with
the standard setting ("0") indicating a position directly in
front of the listener.
ELEVATION [L]
ELEVATION [R]
This parameter moves the sound vertically along the
perimeter of an imaginary sphere. The setting is made as the
number of degrees from the front of the listener (0).
114
SHORT DELAY
This is the delay with the maximum delay time of 400 ms.
This effect is efficient for making the sound fatter.
This effect can be used in the "GUITAR MULTI 1" algorithm
when the MOD "SELECT" parameter is set to "SDD."
* For details on MOD (Modulation) settings, refer to "About
MOD " (p.47).
DELAY TIME
Adjusts the delay time.
* If this is set to BPM, the MASTER BPM (p.105) value that is
set for each patch will determine the delay time, so that the effect
will match the tempo of the song. However if the BPM value is
low, the effect will synchronize to twice or four times the BPM.
FEEDBACK
Feedback refers to returning the delayed signal back into the
input of the delay. This parameter adjusts the volume that is
returned to the input. Higher settings will result in more
delay repeats.
FX LEVEL (effect level)
Adjusts the volume of delay sound.
SLICER
This consecutively interrupts the sound to create the
impression that a rhythm backing phrase is being played.
This effect can be used in the "GUITAR MULTI 1" and
"ISOLETER" algorithm when the MOD "SELECT"
parameter is set to "SL."
* For details on MOD (Modulation) settings, refer to "About
MOD " (p.47).
PATTERN
Select the slice pattern that will be used to cut the sound.
RATE
Adjust the rate at which the sound will be cut.
* When this is set to BPM, the MASTER BPM setting (p.105)
made for each patch will determine the rate, producing an effect
sound that is synchronized with the tempo of the song.
However, if the BPM value is large, the effect will synchronize
to 1/2 or 1/4 of the BPM.
Advertisement
Table of Contents
