Table of Contents
Advertisement
TRIGGER SENS (trigger sensitivity)
Adjust the sensitivity of triggering. With low settings of this
parameter, softly picked notes will not retrigger the phrase
(i.e., the phrase will continue playing), but strongly picked
notes will retrigger the phrase so that it will playback from
the beginning. With high settings of this parameter, the
phrase will be retriggered even by softly picked notes.
SLOW GEAR
This produces a volume-swell effect ("violin-like" sound).
This effect can be used in the "GUITAR MULTI 2" algorithm
when the SFX "SELECT" parameter is set to "SG."
* For details on SFX settings, refer to "About SFX" (p.48).
SENS (sensitivity)
This adjusts the sensitivity of the slow gear. When it is set to
a lower value, the effect of the slow gear can be obtained only
with a stronger picking, while no effect is obtained with a
weaker picking. When the value is set higher, the effect is
obtained even with a weak picking.
RISE TIME
This adjusts the time needed for the volume to reach its
maximum from the moment you begin picking.
SPACE CHORUS
This chorus effect simulates the sound from Roland's well-
known SDD-320 Dimension D.
EFFECT
This parameter turns the space chorus effect on/off.
INPUT
This parameter toggles between stereo and monaural input
signals.
MONO:
This produces a space chorus for mono input with the left
and right channels mixed.
ST. (stereo):
This produces a space chorus for stereo input with Space
Chorus applied separately to the left and right channels.
MODE
This parameter lets you choose how the chorus changes.
The function of each parameter
FX LEVEL (effect level)
This adjusts the volume of the effect sound.
DIRECT SWITCH
Switch the direct sound on/off (output/no output).
STEREO PS DLY
(Stereo Pitch Shifter Delay)
This applies a delay effect to the sound of the pitch shifter
effect.
EFFECT
This parameter turns the pitch shifter effect on/off.
MODE
This parameter selects the mode of the Pitch Shifter.
FAST, MEDIUM, SLOW:
A chord can be input with a normal pitch shifter. The
response is slower in the order of Fast, Medium and Slow,
but the modulation is lessened in the same order.
PITCH [L]
PITCH [R]
Adjusts the amount of pitch shift (the amount of pitch
change) in semitone steps separately for each right and left
channel.
FINE [L]
FINE [R]
Make fine Adjustments to the pitch shift separately for each
right and left channel.
* The amount of the change in the FINE "100" is equivalent that
of the Pitch "1."
PRE DELAY [L]
PRE DELAY [R]
Adjusts the time from when the direct sound is heard until
the pitch shifted sounds are heard separately for each right
and left channel. Normally you can leave this set at "0 ms."
FB DELAY TIME [L]
(feedback delay time L)
FB DELAY TIME [R]
(feedback delay time R)
They adjust the delay time of the pitch-shifted feedback
sound independently for the right and left channels.
115
Advertisement
Table of Contents
