Table of Contents
Advertisement
Front and rear panels
Front panel
fig.0-001
( 1 )
( 2 )
(1) POWER/INPUT (L/R)
Power switch/Input level knob (L/R)
Pressing this knob will turn the power on/off. Rotating the
knob will adjust the input level. The input level can be
adjusted separately for left and right.
(2) GUITAR (Hi-Z)
Guitar jack
This is an input jack for guitar (high impedance).
(3) Display
This is where the VF-1 displays various information, such as
the current state of settings.
(4) UTILITY
Utility button
Press this when you wish to make system settings, use the
tuning function, or make MIDI-related settings.
(5) WRITE
Write button
Press this when you wish to save or copy effect settings.
12
( 3 )
(6) EXIT
Exit button
By pressing this button you can cancel a parameter setting
and return to the performance screen.
(7) CATEGORY
Category button
Press this button when you wish to search by category.
(8) PARAMETER (
Parameter buttons
Use these buttons to select the parameter whose value you
wish to change. When you press these buttons, the cursor
will move between parameter or setting locations in the
display.
(9) NUMBER/VALUE, EFFECTS/ENTER
Number/Value knob, Effects/Enter button
By rotating the knob, you can select patch numbers or
modify parameter values.
By pressing the knob, you can switch effects on/off, or
finalize a value.
( 4 ) ( 5 ) ( 6 )
( 9 )
(7)
(8)
/
)
Advertisement
Table of Contents
