Pb34 Chorus+Reverb - Boss VF-1 Owner's Manual

Algorithm list
P 34 CHORUS+REVERB
B
fig.4-220
Input L
Input R
This allows you to simultaneously and independently use chorus and reverb on the L and R channels.
A four-band equalizer is provided on the input.
In this Algorithm, what you have set with the DIRECT MIX (p.46) will have effect.
Lch & Rch: 4BAND EQ (Equalizer)
EFFECT OFF, ON
LOW EQ -20–+20 (dB)
HIGH EQ -20–+20 (dB)
LEVEL -20–+20 (dB)
LO-MD F 100–10.0 k (Hz)
LOW-MID Q 0.5–16.0
LOW-MID EQ -20–+20 (dB)
HI-MD F 100–10.0 k (Hz)
HI-MID Q 0.5–16.0
HI-MID EQ -20–+20 (dB)
Lch: CHORUS
EFFECT OFF, ON
MODE MONO, ST.
RATE 0–100, BPM:
DEPTH 0–100
PRE DELAY 0.0–40.0 (msec)
LOW CUT FLAT, 55–800 (Hz)
HIGH CUT 700–11 k (Hz), FLAT
FX LEVEL 0–100
DIRECT SWITCH OFF, ON
88
4BAND EQ
4BAND EQ
FV
CHORUS
REVERB
Rch: REVERB
EFFECT OFF, ON
TYPE ROOM1, ROOM2, HALL1, HALL2, PLATE
REVERB TIME 0.1–10.0 (sec)
BALANCE DIR:FX 100:0–0:100
EFFECT LEVEL 0–100
PRE DELAY 0–100 (msec)
DENSITY 0–10
LOW CUT FLAT, 55–800 (Hz)
HIGH CUT 700–11 k (Hz), FLAT
MASTER
<MASTER>
LEVEL 0–100
BPM 40–250, MIDI, GLOBAL
<FV: FOOT VOLUME>
FOOT LEVEL 0–100
Output L
Output R