Table of Contents
Advertisement
The function of each parameter
LOFI BOX
This allows you to create a "lo-fi" sound.
EFFECT
This parameter turns the lo-fi box effect on/off.
SELECT
Select the mode of the lo-fi box.
* If you edit an effect with "SELECT," the effect parameter that
you have set before editing will be initialized.
RADIO:
The sound will appear to be heard from an AM radio. By
adjusting "Tuning," you can simulate the sounds that occur
when you adjust the tuning frequency of the radio.
PLAYER:
The sound will appear to be heard from a gramophone. The
noise caused by scratches and dust on the record is
simulated.
PROCESSOR:
This allows you to create a "lo-fi" sound by lowering the
sample rate and/or decreasing the number of bits. Realtime
modify filters connected in series allow you to reshape the
sound freely.
<When "RADIO" or "PLAYER" is selected>
TUNING
This is a parameter for "Radio." It simulates the sounds that
occur when you adjust the tuning frequency of an AM radio.
WOW FLUTTER
This is a parameter for "PLAYER." It simulates the wow and
flutter which occur when the speed of the turntable is not
constant.
NOISE
This simulates noise.
FILTER
Adjusts the filter.
SOUND
Adjusts the tone.
104
<When "PROCESSOR" is selected>
PRE FILTER
This filter decreases digital distortion. By turning this off,
you can create an extremely lo-fi sound that includes digital
distortion.
SAMPLE RATE
Modify the sample rate. If this is turned off, when it is set to
"off" the sample rate does not work at all.
BIT
Modify the number of data bits. If this is turned off, the
number of data bits will be unchanged.
If an extremely low number of bits is selected, loud noise
may appear even when there is no sound, depending on the
input source. In such cases, raise the threshold of the noise
suppressor.
POST FILTER
This filter decreases the digital distortion produced by lo-fi.
By turning this off, you can create an extremely lo-fi sound.
FX LEVEL (effect level)
Adjust the volume of the lo-fi sound.
DIR LEVEL (direct level)
Adjust the volume of the direct sound.
REALTIME MODIFY FILTER
Select the filter type.
OFF:
The realtime modify filter will not be used.
LPF:
The low pass filter will operate.
BPF:
The band pass filter will operate.
HPF:
The high pass filter will operate.
CUTOFF
Adjust the cutoff frequency.
RESONANCE
Adjust the resonance.
GAIN
Adjust the volume level of the sound that has passed
through the realtime modify filter.
Advertisement
Table of Contents
