Table of Contents
Advertisement
The function of each parameter
FEEDBK [L] (feedback L)
FEEDBK [R] (feedback R)
These parameters are for a stereo-input delay, and adjust the
amount of feedback for left and right channels
independently. Adjusting the amount of feedback will
change the number of times that the delay sound is repeated.
LEVEL [C]
LEVEL [L]
LEVEL [R]
These parameters are for "3TAP." Adjusts the volume of the
output from each tap.
HIGH DAMP GAIN
This parameter adjusts the amount of damping for High
Damp. No high-frequency damping occurs when set to "0."
HIGH CUT FILTER (HIGH CUT)
The High Cut Filter cuts the frequency contents that are
higher than the set frequency. This parameter adjusts the
frequency where the high cut filter starts working. When it is
set to "FLAT," the high cut filter does not work at all.
FX LEVEL (effect level)
This adjusts the volume of the delay sound.
DIR LEVEL (direct level)
Adjusts the volume of the direct sound.
DISTANCE
Microphones have a characteristic which causes the low
frequency range to be boosted when the sound source is
nearby. This setting simulates this phenomenon.
EFFECT
This parameter turns the distance effect on/off.
PROX.FX (proximity effects)
Adjust the low frequency response that is affected by the mic
distance from the sound source. Adjustment in the "+"
direction will move the mic closer to the sound source, and in
the "–" direction will move it away from the sound source.
TIME
This simulates the time difference due to distance from the
sound source.
96
DISTORTION
This effect distorts the sound. By changing the TYPE, you can
create many different sounds.
EFFECT
This parameter turns the distortion effect on/off.
TYPE
This allows you to select the distortion type you like.
TURBO OD (turbo overdrive):
Allows you to obtain a rich effect just like distortion, without
losing the subtle nuance of the overdrive.
BASS OD (bass overdrive):
Rich and firm overdrive sound can be created.
HARD DS (hard distortion):
This produces a rich and powerful heavy metal sound.
FUZZ 1:
This produces a full-bodied, traditional fuzz sound that has
the lower and middle range emphasized.
FUZZ 2:
This produces an exciting fuzz sound that has its overtones
emphasized.
DRIVE
Adjusts the depth of distortion. A higher value will
emphasize the distortion.
BASS
This controls the bass sounds. You can set an appropriate
frequency band for each TYPE.
TREBLE
This controls the treble sounds. You can set an appropriate
frequency band for each TYPE.
FX LEVEL (effect level)
This adjusts the volume of the distorted sound.
DIR LEVEL (direct level)
This adjusts the volume of the direct sound when the effect is
turned on.
Advertisement
Table of Contents
