Pb8 Vocoder - Boss VF-1 Owner's Manual

Algorithm list
P 8 VOCODER
B
fig.4-227
Input L
(Instrument)
Input R (Mic)
Vocoder is an effect that allows you to produce the impression that an instrument is speaking or singing with a human voice.
When using the vocoder, input an instrumental sound to the L channel, and a human voice to the R channel. The instrumental
sound will be divided into 10 frequency bands, and will be processed according to the frequency components of the voice.
* We recommended the microphone should be pre-amplified (by a mixer, etc.).
VOCODER
EFFECT OFF, ON
ENVELOPE SHARP, SOFT, LONG
PAN MODE MONO,STEREO, L->R, R->L
HOLD OFF, ON
MIC SENS 0–100
SYNTH LEVEL 0–100
CHAR [1]– [10] 0–100
MIC MIX 0–100
MIC HPF THRU, 1.0 k–20.0 k (Hz)
MIC PAN L:R 100:0–0:100
NS THRESHOLD 0–100
STEREO CHORUS
EFFECT OFF, ON
POLARITY SYNC, INVERT
RATE 0–100, BPM:
DEPTH 0–100
PRE DELAY 0.0–40.0 (msec)
LOW CUT FLAT, 55–800 (Hz)
HIGH CUT 700–11 k (Hz), FLAT
EFFECT LEVEL 0–100
62
VOCODER
NS.
SUPPRESSOR
CHORUS
CHORUS
FV
REVERB
EFFECT
TYPE
REVERB TIME
PRE DELAY
LOW CUT
HIGH CUT
DENSITY
FX LEVEL
MASTER
<MASTER>
LEVEL
BPM
<FV: FOOT VOLUME>
FOOT LEVEL
Output L
REVERB
Output R
OFF, ON
ROOM 1, ROOM 2, HALL 1, HALL 2,
PLATE
0.1–10.0 (sec)
0–100 (msec)
55–800 (Hz)
700–11 k (Hz), FLAT
0–10
0–100
0–100
40–250, MIDI, GLOBAL
0–100