Features On Request - Kontron COMh-sdID User Manual

The NVMe is based on TLC technology and can be configured as pSLC as well. Configuring the TLC-
NVMe as pSLC results in dividing the capacity by three.

3.5.7 Features on Request

On the COMh-sdID following optional features are available on request:
Optional Features (on request)
Up to 1 TByte NVMe PCIe SSD NAND Flash
NVMe SSD
- TLC technology - configuration as pSLC can be offered
PCIe for BMC Support of PCIe x1 to carrier for an BMC
2nd SPI Flash On-module fail-safe 2nd SPI flash implemented for additional safety
UART 2 UART serial RX/TX ports from SOC (PCIe based, non-legacy, no RTS/CTS) instead of Embedded Controller
www.kontron.com
COMh-sdID User Guide
30/58