Following Rules Must Strictly Be Adhered To; Warranty; Installation Of The Centrifuge; Unpacking The Centrifuge - Hermle OLEUM Operating Manual

Oil test centrifuge
Table of Contents

Advertisement

PRODUCT DESCRIPTION

1.6.5 Following Rules Must Strictly be Adhered To:

Do not operate the centrifuge if not installed correctly.
Do not operate the centrifuge when dismounted (e.g. without housing).
Do not run the centrifuge, if mechanical or electrical assembly groups have been tampered
with, by unauthorized personnel.
Do not use accessories such as rotors and buckets, that are not approved by HERMLE
Labortechnik GmbH, except commercially available centrifuge tubes, made of glass or
plastic.
Do not spin extremely corrosive substances, as they may cause material damages and impair
mechanical resistance.
Do not operate the centrifuge with rotors or buckets, that show any signs of corrosion or
mechanical damage.
The manufacturer is responsible for safety and reliability, of the centrifuge, only if:
The unit is operated in accordance to this instruction manual.
Modifications, repairs or other adjustments are performed by HERMLE-authorized personnel
and the electrical installation of the related location corresponds to the IEC-regulations.

1.6.6 Warranty

The centrifuge has been subjected to thorough testing and quality control. In the unlikely case of any
manufacturing faults occurring, the centrifuge and rotors are covered by warranty, for a period of two
years, from date of delivery. This warranty becomes invalid in any case of mishandling, damage
and/or negligence and further in any case of usage of inappropriate spare parts and / or accessories
or unauthorized modification of the unit.
Technical modification rights are reserved, by the manufacturer, in regards to technical
improvement!

1.7 Installation of the Centrifuge

1.7.1 Unpacking the Centrifuge

Model OLEUM is supplied on a palette in a carton.
Remove the strap retainer and lift the carton up. Remove the padding so that the centrifuge is
standing freely on the palette.
Lift the centrifuge on both sides (see Figure 1) with an appropriate number of helpers and place it on
the laboratory table.
Attention! Do not lift the centrifuge from under the lid or by the front panel!
6
OLEUM_V1.19_eng
© Hermle Labortechnik GmbH

Advertisement

Table of Contents
loading

Table of Contents