Configure The Prophesy For Remote Access; Configure The All Access To Control The Prophesy - Rocktron Prophesy II User Manual

Please refer to the All Access
manual for detailed
information on editing the
All Access.
———————————————————————————————————————————————————
2

Configure the Prophesy for remote access:

Use the PAGE control to access the first MIDI page, which looks like
the page below.
MIDI RX
———————————————————————————————————————————————————
3 Use the control labeled "MID" to enable Remote mode operation.
MIDI RX
OMNI
———————————————————————————————————————————————————
4 If the Prophesy preset titles are to be displayed by the All Access, use
the "TREBLE" control to set the TITLE parameter to "ON", enabling
title transfers from the Prophesy to the All Access.
MIDI RX
OMNI
———————————————————————————————————————————————————
5

Configure the All Access to control the Prophesy:

Set the Operating Mode to "REMOTE".
———————————————————————————————————————————————————
6 Set the Bank Size to "10".
———————————————————————————————————————————————————
7 Reinitialize only the controller information for the instant access
switches and pedals using the All Access controller restore code
number "231".
———————————————————————————————————————————————————
8 If the preset titles from the Prophesy are to be displayed on the All
Access automatically, set the Remote Title Number to match the "REM
ID" parameter value on the Prophesy.
TX REMOTE TITLE REMID
1 1 OFF OFF 0
TX REMOTE TITLE REMID
1 O N OFF 0
TX REMOTE TITLE REMID
1 O N O N 0
85