Cntnum; Parm; Uplim; Lowlim - Rocktron Prophesy II User Manual

Controller Pages
122
( 1 )

CNTNUM

PARM

UPLIM

LOWLIM

( 1 ) C N T N U M P A R M UPLIM
14 PITCH1 +300
This number indicates the controller that is currently being edited.
The CONTROLLER NUMBER parameter is used to select a controller number
for the current controller to respond to. (0 to 120, ADSR)
The PARAMETER parameter determines the Prophesy parameter that is to be
controlled by the current controller.
The UPPER LIMIT parameter sets the highest value that the controlled
parameter is not to exceed through MIDI control changes. (The parameter values
that appear here will depend on the actual parameter selected in the PARM
parameter.)
The LOWER LIMIT parameter sets the lowest value that the controlled
parameter is not to fall below through MIDI control changes. (The parameter
values that appear here will depend on the actual parameter selected in the
PARM parameter.)
The remaining seven (7) Controller pages repeat the above parameters to
define controllers 2-8.
LOWLI M
-200
5 9